總述

Summary

滾邊機是用在祛除輪輞機頭之后生的輪輞角處振紋的全相互裝備，以冷滾壓的體例中止修緣至油滑過度，做完取得進步輪輞品格的提起。該裝備能制作各寸尺小線輪輞，制作規模化廣，裝備列席定位精性強，悅納自己全相互化工作體系，任務卡作用高，設計松軟。Roll edge machine is used to remove the burr of rim both edge after rim roll forming, adopt cold rolling way to process the rim edge upto smooth, to achieve the requirements of improving the rim quality. The equipment can process the size at diameter 13-17 inch of car rim line, this machine use fully automated system with high efficiency, compact structure.

規格參數

Specification

裝配機型	Model Number	GBJ-350
輪輞較大總寬	Max. Width of Rim Band	290mm
輪輞明顯網套直徑	Max. Diameter of Rim Band	18 inches
輪輞最少直經	Mini. Diameter of Rim Band	13 inches
輪輞大重量	Max. Thickness of Rim Band	5mm
單邊極限滾邊力	Rolling Force of Single Side	1.7Tons
收窄環境	Pressure of Compressed Air	0.4-0.6Mpa
右側滑動能自由調節劑接連	Adjustable Distance of Single Si de Roller	150mm
滾邊輪時速	Roller Speed	230r/min

特點

1) 旋轉西式Running Process

加料→滾珠及時下壓→位移→消弭鋸齒→滾珠抓緊時間→卸料→卸料組裝起降→開料籌備一產品工件及時流入。

都是極品裝備積極主動化水平面高，布置干硬，釣魚任務物上請求權高。

feed material→ roller wheel press down automatically→ rotation→ remove burr→ roller wheel releases→ material unload→ unloading device goes down→ prepare unloading→ workpiece enters automatically.The equipment has high automatically production level, intensive structure, and high working efficient.

2) 紫裝全活躍化，取得成效已完成體例上帶單動支配、自功支配和活躍支配的的功效。

輔助裝備措施道理由PLC合理，從容靠經得住

The equipment is full automatically, whose operation mode has single operation, manual and auto operation.

Its operation logic is controlled by PLC.

3) 支配接口（HMI）妙手動填報加工廠多型號鋼圈的調濟后數據并存儲，以備不時之需就能夠挪用資金，就能夠如果你顯現出傳奇裝備里面的旌旗燈號的設置條件和雷達回波圖條件。

On operating interface (HMI) can input adjusted parameter of every rim size manually and record them to call parameter instantly. It also shows the set condition of equipment’s external signal and its current condition.

4) 出入料渠道層面、壓緊輪層面、擋料主導地位、下滾模滾邊坡度等工作任務技術參數可面向的差別品種的鋼圈關閉調里。

The working parameters, like width of loading/unloading path, pressing wheel’s height, material baffle position, roll-edge dip angle of lower rolling tool, can be adjusted according with different rim specifications.

5) 配置所有戰略布局相同靠得下，抗振器能好；擁有充裕的靠得下性,在蓄電量刻日內有充裕的構造、強度、相同性、耐侵襲性、抗委靡性。

Equipment’s over-all structure is stable and reliable with excellent shakeproof ability. It is reliable enough to keep sufficient strength, rigidity, stability, corrosion resistance, fatigue resistance.

6) 雙旋輥架（開始的）水壓隨意調節，轉動速度120~200轉/分，上壓延機油路分配器壓緊，水壓隨意調節4-8kg/cm2，出入料架高寬比隨意調節6"-16.5"，全部車程合理、位置合理、有木有有零件重量顯示均容忍雙位無接點覺著重量顯示，作到重量顯示滿有認清。

缺件，自然持續運行時各步驟都形成綠燈，有愿因時某步驟形成紅綠燈并報警信號響鈴形成，是為了24小時正確處理。在改換副產物時，只用改換下模壓鑄模，和專業專業調劑刀痕輥的視角，專業專業調劑時期為6分鐘。

The pressure of double rotation roller rack can be adjusted. Its rotation speed is 120~200r/min. Pressure adjustable range is 4-8kg/cm2 (0.4-0.8Mpa) for pneumatic clamping of upper material pressing roller. Width of material loading/unloading path adjustable range is 6"-16.5". All the stroke control, position control, workpiece display adopt two-position noncontacting sensor vision.

In situation when without workpiece or safe running green indicator lights. When fault occurs, some process will light red indicator and alarm to dial with problems. It just need to change lower tool and adjust angle of deburr roller when change products. The adjustment time is 4 minutes.